D2 tool steel

1.2379 vs 1.3343 for Cold Heading Punches: Which Tool Steel Should You Choose?

Cold Forming Tooling /

Comparing two widely used tool steels for cold heading punches — and when each may be considered In One Sentence 1.2379 (D2) and 1.3343 (M2) are both frequently considered for cold heading punches, but they excel under different conditions — 1.2379 offers high wear resistance, compressive strength and good dimensional stability at generally lower material

1.2379 vs 1.3343 for Cold Heading Punches: Which Tool Steel Should You Choose? Read More »

Tool Steel Selection for Cold Forming Tooling: A Practical Guide

Cold Forming Tooling /

A side‑by‑side comparison of the most common tool steel grades used in cold heading punches, dies, cut‑off knives, and transfer fingers In One Sentence Choosing the right tool steel for cold forming tooling is a balancing act between wear resistance, toughness, compressive strength, and cost. The optimal material depends on the specific component, failure mode,

Tool Steel Selection for Cold Forming Tooling: A Practical Guide Read More »

D2 vs 1.2601 vs 1.1730: Which Tool Steel Is Right for Your Stamping Application?

Materials Knowledge /

D2 vs 1.2601 vs 1.1730: Which Tool Steel Is Right for Your Stamping Application? In One Sentence Choose 1.1730 / C45U for cost‑sensitive low‑duty tooling, D2 / 1.2379 for balanced wear resistance and toughness in general stamping applications, and 1.2601 / X165CrMoV12 when extreme abrasive wear resistance is the top priority and impact toughness is

D2 vs 1.2601 vs 1.1730: Which Tool Steel Is Right for Your Stamping Application? Read More »

D2 / 1.2379 Tool Steel CNC Machining Guide: Properties, Applications & Design Considerations

Materials Knowledge /

Engineering guide to machining, applications, material selection, and production risks | AISI D2 / EN 1.2379 / Cr12Mo1V1 / SKD11 In One Sentence D2 / 1.2379 tool steel is selected when engineers need high wear resistance and good dimensional stability for tooling — offering a balanced alternative to 1.2601 for applications where impact toughness is

D2 / 1.2379 Tool Steel CNC Machining Guide: Properties, Applications & Design Considerations Read More »

Scroll to Top